INFLUENCIA DE LAS CONDICIONES DE PROCESAMIENTO SOBRE EL COMPORTAMIENTO A FRACTURA DE UN HOMOPOLÍMERO DE POLIPROPILENO Y UN COPOLÍMERO ETILENO-POLIPROPILENO MOLDEADOS POR INYECCIÓN
Abstract
The influence of injection process conditions over the fracture behavior of two types of polypropylene (PP) was studied. The J integral to determine the fracture toughness of polymers was applied; also the micro-structure as an influential factor over the fracture behavior was determined. For this, the thermo-mechanical indexes were calculated using flow simulations, to establish a relationship between thermo-mechanical properties. The Taguchi methodology design was used to reduce the number of experiments applied. The injection temperature (Tf) is a process conditions that affects the tensile strength of the polymers. At low Tf, the morphology is characterized by increased skin thickness and thus, the core is smaller, implying a lower crystalinity and higher values of Jc.Downloads
Downloads
Published
How to Cite
Issue
Section
License
The authors of papers accepted for publication by the RLMM, should recognize the complete transfer of copyright (in all languages) to the RLMM. This transfer includes the right by the RLMM to adapt the article for digital or printed reproduction without altering the written content and information displayed in tables or figures within. The authors retain the copyright and guarantee the journal the right to be the first publication of the work as well as licensed under a Creative Commons Attribution License 4.0 Internacional (CC BY 4.0) which allows others to share the work with an acknowledgment of the authorship of the work and the initial publication in this journal.

