DISEÑO DE MOLDES DE INYECCIÓN PARA SISTEMA VÁLVULA FLOTADOR USANDO BOTELLAS DE PET COMO FLOTANTE

Authors

  • Mariangel Berroterán
  • Marí­a V. Candal
  • Nelson Colls
  • Magda Castillo
  • Luis Marí­n

Abstract

The plastic parts for a float-valve-base system were designed. In the design was considered the use of PET bottles as floating device instead of the regular spheres. This was done to promote the reuse of this plastic container and to decrease plastics residues in the environment. Additionally, the part thickness was reduced to use less plastic on the parts, and to decrease cycle times. Each mold was designed and the optimum injection molding conditions were determined for each piece. For the valve, the minimum thickness was 2 mm with an eight-second cycle time; for the threaded connector and floating arm, the thickness was 2,5 mm, for both pieces. Their cycles times were 16 s and 13 s, respectively. All molds are two-plate, with two cavities, using inserts  for  the  each  individual  cavity.  The refrigerating  system  proposed  uses  u-shape channel,  and  the expulsion  system  is  composed  by  ejector  pins.  Threaded  connector´s  mold  is  more complex  due to  the expulsion system, which requires two-step opening.

Downloads

Download data is not yet available.

Published

2011-05-30

How to Cite

Berroterán, M., Candal, M. V., Colls, N., Castillo, M., & Marí­n, L. (2011). DISEÑO DE MOLDES DE INYECCIÓN PARA SISTEMA VÁLVULA FLOTADOR USANDO BOTELLAS DE PET COMO FLOTANTE. LatinAmerican Journal of Metallurgy and Materials, 18–19. Retrieved from https://rlmm.org/ojs/index.php/rlmm/article/view/206

Issue

Section

Supplementary Articles